Roboki - Session 6

Building the Entry guard bot Step-by-Step

Description :

Contents : 1. HARDWARE Let's Make it! 1.1 What do we need ? 1.2 How is it Made ? 2. SOFTWARE 2.1 Let's Code it ! 3. WHAT NEXT? Challenge!

Before we begin, take a look at the picture of the bot to get a better understanding of the different parts of this object finder bot.

1.HARDWARE

Let's make it!

We are going to follow the steps in this tutorial to assemble our object finder bot. Look carefully into each of the images and follow the instructions one by one to make this wall follower bot. The colour of the blocks and parts used in the construction might differ from original, So carefully follow the instruction given below.

1.1 What do we need ?

Given below are the materials required to build the object finder bot.

1.2 How is it made ?

Follow the steps carefully to build the Object Finder Robot

1. Place the 15 by 11 block on a flat surface.

2. Attach one 11 by 7 block to the 15 by 11 block using two 90 degree pegs.

3.

4.

5.

6.

7.8.9.10.11.12.

13.14.

15.

2. SOFTWARE

2.1 Let's Code it  !

Now that our Bot is ready, we need to programme it using Plode to make it .Follow the step by step instruction in the video given below to programme the object finder bot.

3. What Next?

Challenge!

Develop a reverse parking assistance system using proximity sensors to visually display distance on a screen and activate a visual alarm when the vehicle aproaches obstacles, enhancing parking precision and safety.